English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 45069/58245 (77%)
造訪人次 : 2369908      線上人數 : 166
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    類別瀏覽

    正在載入社群分類, 請稍候....

    年代瀏覽

    正在載入年代分類, 請稍候....

    "Tang LJ"的相關文件  

    回到依作者瀏覽

    顯示 32 項.

    類別 日期 題名 作者 檔案
    [牙醫學系] 期刊論文 2013 人工合成多分子矯正彈性橡皮鏈之文獻回顧 林婉婷; 鄭信忠; 沈永康; 陳怡君; 陳建鋒
    [牙醫學系] 會議論文 2013 The Study on Modified Properties of Orthodontic Power Chain after Nanoimprinting 信忠, 鄭; 林宛婷; 沈永康; 王彥翔
    [牙醫學系] 會議論文 2012 The Study on Properties of Orthodontic Power Chain after Surface Treatment 信忠, 鄭; 林宛婷; 沈永康; 王彥翔
    [牙體技術學系] 會議論文 2010 侵入式聚乳酸微針結合有限元素分析應用於藥物傳輸系統之研究 沈永康; 蕭浩明; 廖英志; 康盛捷
    [牙體技術學系] 會議論文 2010 化學還原法生成銀薄膜之噴墨製程模擬 蕭浩明; 沈永康; 洪英瀚; 廖英志
    [牙體技術學系] 會議論文 2010 生醫陶瓷骨骼支架製程改善 陳思翰; 劉福興; 林文雄; 李瑞宗; 沈永康
    [牙醫學系] 會議論文 2009 A Novel and Rapid Fabrication of Microlens Arrays by Micro Injection Molding 鄭信忠; Ou KL; Peng PW; Cheng HC; Huang CF; Shen YK
    [牙醫學系] 會議論文 2009 A Novel and Rapid Fabrication of Microlens Arrays by Micro Injection Molding �G�H��; Ou KL; Peng PW; Cheng HC; Huang CF; Shen YK
    [牙體技術學系] 會議論文 2008 奈米壓印機之設計開發與製程成型性之探討 沈永康; Shen YK
    [牙體技術學系] 會議論文 2008 應用濺鍍氧化鋅薄膜於骨細胞檢測 沈永康; Shen YK; Ou KL; Hong RH; Hsu SC; Wu MW; Yu YF
    [牙體技術學系] 期刊論文 2008 Analysis of Replication and Surface Roughness of Micro-feature of Silicon Mild Insert by UV-LIGA Method 沈永康; Huang CF; Lee JL; Shen YK; Wu CW; Hsu SC; Wu MW
    [牙體技術學系] 期刊論文 2008 Study on micro injection molding of light guiding plate by numerical simulation 沈永康; Huang CF; Shen YK; Chang CY; Wu CH; Chen JH; Guan PJ
    [生醫材料暨組織工程研究所] 期刊論文 2008 Luminance and brightness field distribution of light guiding plate for backlight panel (BLP) by micro molding 楊正昌; Huang CF; Shen YK; Lin Y; Yang JC; Wu CW
    [牙醫學系] 期刊論文 2008 Analysis for biodegradable polymeric scaffold of tissue engineering on precision 鄭信忠; Wu TL; Ou KL; Cheng HC; Huang CF; Shen YK; Chian YC; Lin Y; Chan YH; Li CP
    [生醫材料暨組織工程研究所] 期刊論文 2008 Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding 歐耿良; Wu TL; Ou KL; Cheng HC; Huang CF; Shen YK; Chian YC; Lin Y; Chan YH; Li CP
    [生醫材料暨組織工程研究所] 期刊論文 2008 Study on micro injection molding of light guiding plate by numerical simulation 歐耿良; Tsai MH; Ou KL; Huang CF; Cheng HC; Shen YK; Chang CY; Wu CH; Guan PJ
    [牙體技術學系] 期刊論文 2007 A Flapping Micro Aerial Vehicle with PVDF-Parylene Composite Skin 沈永康; Tang LJ; Feng CK; Hsu CK; Ho JY; Feng GH; Shih HM; Shen YK
    [牙體技術學系] 期刊論文 2008 Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding 沈永康; Huang CF; Shen YK; Chiang YC; Lin Y; Chan YH; Li CP
    [牙體技術學系] 期刊論文 2008 Analysis for microstructure of microlens arrays on micro injection molding by numerical simulation 沈永康; Shen YK; Huang CF; Shen YS; Hsu SC; Wu MW
    [牙體技術學系] 期刊論文 2008 Analysis for optimal gate design of thin-walled injection molding 沈永康; Shen YK; Wu CW; Yu YF; Chung HW
    [牙體技術學系] 期刊論文 2008 Analysis of Mold Insert Fabrication for the Processing of Microfluidic Chip 沈永康; Shen YK; Lin JD; Hong RH
    [牙體技術學系] 期刊論文 2008 Luminance and brightness field distribution for light guiding plate for backlighting unit (BLU) by micro molding 沈永康; Huang CF; Shen YK; Lin Y; Yang JC; Wu CW
    [牙體技術學系] 期刊論文 2009 Microfluidic chip fabrication using hot embossing and thermal bonding of COP (Accepted) 沈永康; B.Y. Pemg; C.W. Wu; Y.K Shen; Y. Lin
    [牙醫學系] 期刊論文 2008 Study on micro-injection molding of light guiding plate by numerical simulation 鄭信忠; Tsai MH; Ou KL; Huang CF; Cheng HC; Shen YK; Chang CY; Wu CH; Chen JH; Guan PJ
    [牙體技術學系] 計畫報告 2009 應用微噴射加工技術製作微流體晶片微流道之研究 沈永康
    [牙體技術學系] 計畫報告 2009 拍翼式飛行器之研發與製作---子計畫三:應用精密塑膠成型技術開發新穎塑膠材料於飛行器之骨架零件研究 沈永康
    [牙體技術學系] 計畫報告 2010 以陽極氧化鋁模板運用奈米成形技術於表面改質及圖案化生醫可降解材料之應用 沈永康
    [牙體技術學系] 期刊論文 2004 Extention Method and Numerical Simulation of Micro-Injection Molding 沈永康; Shen Yk; Shie YJ; Wu WY
    [牙體技術學系] 期刊論文 2004 Resin Flow Characteristic of Underfill Process on Flip Chip Encapsulation 沈永康; Shen YK; Ju CM; Shie YJ; Chein HW
    [牙體技術學系] 期刊論文 2004 Study on Warpage and Shrinkage of Flip Chip Encapsulation Process 沈永康; Shen YK; Liao JH; Zhao WX
    [牙體技術學系] 期刊論文 2006 A Novel Fabrication Method for Mold Insert of Injection Molded Microlens Array 沈永康; Shen YK
    [牙體技術學系] 期刊論文 2008 Precision Transfer and Replication of Ultrasonic Nanoimprint 沈永康; Huang CF; Lee JL; Shen YK; Lin Y; Wu CW

    著作權聲明 Copyright Notice
    • 本平台之數位內容為臺北醫學大學所收錄之機構典藏,包含體系內各式學術著作及學術產出。秉持開放取用的精神,提供使用者進行資料檢索、下載與取用,惟仍請適度、合理地於合法範圍內使用本平台之內容,以尊重著作權人之權益。商業上之利用,請先取得著作權人之授權。

      The digital content on this platform is part of the Taipei Medical University Institutional Repository, featuring various academic works and outputs from the institution. It offers free access to academic research and public education for non-commercial use. Please use the content appropriately and within legal boundaries to respect copyright owners' rights. For commercial use, please obtain prior authorization from the copyright owner.

    • 瀏覽或使用本平台,視同使用者已完全接受並瞭解聲明中所有規範、中華民國相關法規、一切國際網路規定及使用慣例,並不得為任何不法目的使用TMUIR。

      By utilising the platform, users are deemed to have fully accepted and understood all the regulations set out in the statement, relevant laws of the Republic of China, all international internet regulations, and usage conventions. Furthermore, users must not use TMUIR for any illegal purposes.

    • 本平台盡力防止侵害著作權人之權益。若發現本平台之數位內容有侵害著作權人權益情事者,煩請權利人通知本平台維護人員([email protected]),將立即採取移除該數位著作等補救措施。

      TMUIR is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff([email protected]). We will remove the work from the repository.

    Back to Top
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋