Ambroxol緩釋錠之製造及其特性研究

TMUIR > College of Pharmacy > School of Pharmacy > Dissertation/Thesis > Item 987654321/6472

Please use this identifier to cite or link to this item: http://libir.tmu.edu.tw/handle/987654321/6472

Title:	Ambroxol緩釋錠之製造及其特性研究 PREPARATION AND CHARACTERIZATIONS OF AMBROXOL SR TABLET
Authors:	許天賜 Hsu Tien-Tzu
Contributors:	藥學研究所
Keywords:	ambroxol 緩釋劑型熱融造粒法 ambroxol sustained release melt-coating granulation
Date:	2003
Issue Date:	2009-09-11 16:56:31 (UTC+8)
Abstract:	本論文之研究目的乃在於發展以口服方式投與一天一次的緩釋型Ambroxol錠劑。藉由熱融造粒技術可以得到一最佳化的藥物釋出速率且具有24小時的持續性釋放藥物之錠片，商品名定為”安疏痰緩釋錠片” （Amsolvon SR Tablet），同時評估其錠片之物化性質，包括重量差異試驗、含量均一度試驗、硬度試驗、粉碎度試驗及溶離度試驗等。體外溶離試驗結果顯示熱融顆粒大小與壓錠速率並無明顯改變藥物的釋放速率與釋放總量，然而錠片的硬度卻有所不同。低壓錠速率與大顆粒所壓製得到的錠片錠片硬度較高，此乃因為錠片賦形劑具有塑性形變之特質。基於藥物溶離不受顆粒大小所影響與高產率的考量下，最後選擇顆粒規格在420 mm （以40號篩網過篩）以下之Ambroxol-Compritol 888之熱融顆粒與其他錠片組成物質混合後，以20 rpm的壓錠速率製造”安疏痰緩釋錠片”；此錠片進一步與國外市售Ambroxol緩釋膠囊（PR-ABX Capsules、Mucosolvan Capsules）進行體外溶離試驗比對。結果顯示”安疏痰緩釋錠片”與PR-ABX Capsules有較佳的溶離相似度。而”安疏痰緩釋錠片”的藥物釋放機制屬於Higuchi滲透模式，亦即藥物釋放速率與溶離時間的平方根成正比關係。長期與加速安定性試驗顯示”安疏痰緩釋錠片”之有效期限至少可達4年。選擇四位健康成年男性受試者進行”安疏痰緩釋錠片”之先期性藥物動力學研究，採用多重劑量口服方式投與，結果顯示其具有持續釋放ambroxol達24小時之能力。於穩定血中濃度狀態之相關藥動學參數平均值與標準偏差值如下:AUC0-24為1559.6±149.4 ng/mL·hr、Cmax為104.63±6.34 ng/mL、Cmin為38.83±13.86 ng/mL、Cav為64.98±6.22 ng/mL、fluctuation為1.03±0.30、AUMC0-24為16246±1784 ng/mL·hr2、MRT0-24為10.41±0.46 hr、Tmax為7.50±1.29 hr、Kel為0.0673±0.0091 hr-1、T1/2為10.46±1.53 hr、CL/F為48.40±4.33 L/hr、Vd/F為735.45±162.44 L. “安疏痰緩釋錠片”已核准開始進行臨床藥效評估，預期此一製劑在未來將可提供更安全穏定的藥物療效，同時增加病患的依順性。 The purpose of this study was to develop a sustained release tablet of ambroxol that to be taken once daily. The optimized ambroxol sustained release tablet, Amsolvon SR tablet as trade name, was prepared via a melt-coating granulation technique and its functionality was characterized based on the following tests: weight variation, content uniformity, hardness, friability and dissolution tests. In vitro dissolution studies show that the drug release rate and amount are not affected by particle size of ambroxol-Compritol 888 melted granules and tabletting speeds. But the hardness of ambroxol SR tablets is influenced by particle sizes and tabletting speeds. Low tabletting speed and large particle size may produce more compact tablets; this can be attributed to the plastic deformation characteristic of the tablet excipients. Finally the particle size of <420 mm of ambroxol-Compritol 888 melted particles were selected in terms of higher production yield. The selected melted particles were mixed thoroughly and tabletted at 20 rpm to obtain Amsolvon SR tablets. The dissolution profile of Amsolvon SR tablets was more similar with PR-ABX capsules than Mucosolvan capsules in all three dissolution media. The drug release mechanism of ambroxol from Amsolvon SR tablets can be described by Higuchi diffusion model. The long-term and accelerated stability tests both showed that Amsolvon SR tablet was stable and its tentative shelf life was 4 years at least. Pharmacokinetic pilot study in four healthy male human subject after oral administration with multiple doses of Amsolvon SR tablets show that the formulation was successful in providing slow release of ambroxol and has mean±SD AUC0-24 of 1559.6±149.4 ng/mL·hr, Cmax of 104.63±6.34 ng/mL, Cmin of 38.83±13.86 ng/mL, Cav of 64.98±6.22 ng/mL, fluctuation of 1.03±0.30, AUMC0-24 of 16246±1784 ng/mL·hr2, MRT0-24 of 10.41±0.46 hr, Tmax of 7.50±1.29 hr, Kel of 0.0673±0.0091 hr-1, T1/2 of 10.46±1.53 hr, CL/F of 48.40±4.33 L/hr, and Vd/F of 735.45±162.44 L. The efficacy and safety of this ambroxol SR tablet (Amsolvon SR tablet) dosage form are currently being evaluated in clinical trials; it may be expected to provide optimum therapeutic efficacy and improve patient’s compliance in the future.
Data Type:	thesis
Appears in Collections:	[School of Pharmacy] Dissertation/Thesis

Files in This Item:

File	Size	Format
摘要.doc	31Kb	Microsoft Word	266	View/Open
摘要.pdf	483Kb	Adobe PDF	385	View/Open
摘要.ppt	113Kb	Microsoft Powerpoint	138	View/Open
摘要.ps	522Kb	Postscript	107	View/Open

Loading...