English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 45422/58598 (78%)
造訪人次 : 2541314      線上人數 : 186
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://libir.tmu.edu.tw/handle/987654321/57658


    題名: 含矽類鑽碳薄膜之功能性研究
    Research of functional properties on Si-doped diamond-like carbon films
    作者: 陳紀佑
    Chen, Chi-Yu
    貢獻者: 生醫材料暨工程研究所
    歐耿良
    關鍵詞: 類鑽碳;射頻磁控濺鍍
    diamond-like carbon;RF sputter
    日期: 2011-06-19
    上傳時間: 2019-06-11 12:33:39 (UTC+8)
    摘要: 類鑽碳是由碳的鍵結SP2鍵結與SP3鍵結混合所構成,因此於特性上同時擁有鑽石與石墨之特性,如高生物相容性、高硬度、化學惰性與低磨擦係數等,是近年來各界積極開發之薄膜材料。且目前盛行於類鑽碳薄膜材料中添加微量元素,以增加其應用之範圍,如添加抗菌性元素矽、銅、銀、鋅與鈦…等等,皆可提高其抗菌力等功能性。
    本研究以射頻磁控濺鍍法進行摻矽類鑽碳薄膜之製備,藉由類鑽碳薄膜內摻入不同含量之矽元素,探討類鑽碳薄膜矽含量對其功能性之影響。由各種物化性分析儀得知,於表面形貌,在類鑽碳膜未摻雜矽元素時,表面碳元素團聚之顆粒較大,於矽元素之增加表面原子成核成長較為細緻,且隨著矽含之增加平均粗糙度、硬度與楊氏模數會隨之減少,且當ID/IG比值越高,硬度越低,水滴接觸角也越小。
    Diamond-like carbon is a carbon, by sp2 bond and sp3 bond mixing compositions. Therefore, it has the characteristics of graphite and diamond, such as high biocompatibility, high hardness, chemical inertness and low friction coefficient. Thin film materials of all active development in recent years. Now often in the DLC film doped a small amount of elements to increase the scope of application. For example, want to increase the antibacterial of DLC can be added Si, Cu, Ag, Zn or Ti, the elements can be antibacterial.
    In this study, RF magnetron sputtering method for silicon-doped DLC film manufacturing. DLC films by incorporation of different content of Si, Si-DLC films of Si content of its functionality. SEM shows the surface of pure DLC reunion of the large particle size, when increasing the content of the surface atoms of Si nucleation and growth in more detail. Average roughness, hardness and Young's modulus will be decrease when the Si content increased. The hardness is lower and the contact angle is smaller when the ID / IG ratio the higher.
    描述: 碩士
    指導教授-歐耿良
    委員-吳其昌
    委員-劉沖明
    資料類型: thesis
    顯示於類別:[生醫材料暨組織工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML212檢視/開啟


    在TMUIR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    著作權聲明 Copyright Notice
    • 本平台之數位內容為臺北醫學大學所收錄之機構典藏,包含體系內各式學術著作及學術產出。秉持開放取用的精神,提供使用者進行資料檢索、下載與取用,惟仍請適度、合理地於合法範圍內使用本平台之內容,以尊重著作權人之權益。商業上之利用,請先取得著作權人之授權。

      The digital content on this platform is part of the Taipei Medical University Institutional Repository, featuring various academic works and outputs from the institution. It offers free access to academic research and public education for non-commercial use. Please use the content appropriately and within legal boundaries to respect copyright owners' rights. For commercial use, please obtain prior authorization from the copyright owner.

    • 瀏覽或使用本平台,視同使用者已完全接受並瞭解聲明中所有規範、中華民國相關法規、一切國際網路規定及使用慣例,並不得為任何不法目的使用TMUIR。

      By utilising the platform, users are deemed to have fully accepted and understood all the regulations set out in the statement, relevant laws of the Republic of China, all international internet regulations, and usage conventions. Furthermore, users must not use TMUIR for any illegal purposes.

    • 本平台盡力防止侵害著作權人之權益。若發現本平台之數位內容有侵害著作權人權益情事者,煩請權利人通知本平台維護人員([email protected]),將立即採取移除該數位著作等補救措施。

      TMUIR is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff([email protected]). We will remove the work from the repository.

    Back to Top
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋