English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 45069/58245 (77%)
造訪人次 : 2344877      線上人數 : 262
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: http://libir.tmu.edu.tw/handle/987654321/4644


    題名: 利用共振頻率非破壞性檢測不同製造方式的鎳鈦合金根管銼
    Nondestructive Tests of Ni-Ti Instruments with Different Manufacturing methods：A Resonance Frequency Analysis
    作者: 林宏龍
    Hung-Lung Lin
    貢獻者: 牙醫學系碩博士班
    關鍵詞: 鎳鈦合金根管銼
    自然頻率
    扭轉方式
    疲勞破壞
    Ni-Ti instruments
    Resonance frequency
    Twisted method
    fatigue
    日期: 2009
    上傳時間: 2009-09-09 14:12:43 (UTC+8)
    摘要: 鎳鈦合金根管銼已經廣泛的使用在牙髓病的治療上，但其無預警的斷裂也是令牙醫師關心的問題，之前並無一科學性的方法來評估鎳鈦合金根管銼的壽命，而本研究室利用自然頻率的分析方式對鎳鈦合金根管銼(ProFile)做非破壞性的疲勞檢測，確定此方式可行且在臨床上有應用的價值。
    近來市面上出現一種新的製造方式，其所製造出來的鎳鈦合金根管銼更具有撓曲性及抵抗性，利用旋轉鎳鈦合金金屬合併熱處理的過程來增加其超彈性及抵抗疲勞破壞。因此本研究繼續探討不同製造過程的鎳鈦合金根管銼，在發生疲勞破壞的情況下，其自然頻率的變化與其使用壽命之間的相關性，主要是評估由旋轉方式所製造的TF器械以及傳統機器切削所製造的ProFile器械。
    在本實驗中，利用人工牙根穩固度檢測儀(Implomate)對TF器械和ProFile器械在經由模擬臨床之動態操作過程中作分析記錄。結果顯示，全新之ProFile器械其自然頻率值出現在5050+0 Hz到5563+25 Hz之間，經由體外動態操作的過程後，ProFile器械的自然頻率值呈現逐步下降和出現少數器械扭曲變形的現象，其中沒有出現器械扭曲變形的ProFile器械，其K值平均降到0.95+0.01。其餘出現器械扭曲變形的ProFile器械，K值則降到平均0.90+0.01。另一組的TF器械，其全新的自然頻率值在5150+0 Hz與5250+0 Hz之間，同樣經過體外動態操作後，其K值則下降到0.93+0.02。
    自然頻率分析法的結果顯示，不同製造方式的鎳鈦合金根管銼，在經過使用後會有不同幅度的下降以及長度的增加量，因此可以將這種檢測方式應用在臨床上。
    Nickel-Titanium (Ni-Ti) instruments have become widely used in the endodontic treatment. However, their unexpected separation was a serious concern in endodontics. To date, no scientific methods have been developed to evaluate the functional lifespan of Ni-Ti instruments. In this study, we used resonance frequency (RF) analysis to nondestructively detect the fatigue life of Ni-Ti instruments to determine the feasibility of this technique for use in the clinic.
    Recently, a new manufacturing method to produce more flexible and resistant Ni-Ti instruments (Twisted File, TF) has been developed. It uses twisting of a ground blank in combination with heat treatment to reportedly enhance superelasticity and increase cyclic fatigue resistance. With this regard, this research aim to investigate the influence of Ni-Ti instruments with different manufacturing methods on the cyclic fatigue. In addition, the relationship between the fatigue life and RF value was evaluated by comparing the lifespan of Ni-Ti instruments and their measured RF values.
    To simulated clinical operation, we used a commercialized RF analysis device (Implomate). Our result shows that the average RF value of new ProFile instruments focus between 5050+0 Hz and 5563+25 Hz. After the in vitro simulated operation, the RF values of the ProFile instruments decreased gradually. For ProFile instruments, without unwinding defects, normalized RF value (K value) before fracture is 0.95+0.01. However, when unwinding defects were detected in the ProFile instruments, the normalized RF value (K value) before fracture decreased to 0.90+0.01. On the other hand, the RF value of the new Twisted File (TF) instruments was measured from 5150+0 Hz to 5250+0 Hz. After clinical operated procedure was simulated, all the instruments showed fracture with unwinding defects. The K value before fracture of the TF instruments was 0.93+0.02.
    These results demonstrate that the RF analysis tests have potential as a tool for structural detection in Ni-Ti instruments and that the method presented is feasible for clinical application.
    資料類型: thesis
    顯示於類別:[牙醫學系] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    摘要.doc29KbMicrosoft Word219檢視/開啟
    摘要.pdf95KbAdobe PDF222檢視/開啟
    摘要.ppt144KbMicrosoft Powerpoint288檢視/開啟
    摘要.ps436KbPostscript81檢視/開啟


    在TMUIR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    著作權聲明 Copyright Notice

    • 本平台之數位內容為臺北醫學大學所收錄之機構典藏，包含體系內各式學術著作及學術產出。秉持開放取用的精神，提供使用者進行資料檢索、下載與取用，惟仍請適度、合理地於合法範圍內使用本平台之內容，以尊重著作權人之權益。商業上之利用，請先取得著作權人之授權。

      The digital content on this platform is part of the Taipei Medical University Institutional Repository, featuring various academic works and outputs from the institution. It offers free access to academic research and public education for non-commercial use. Please use the content appropriately and within legal boundaries to respect copyright owners' rights. For commercial use, please obtain prior authorization from the copyright owner.

    • 瀏覽或使用本平台，視同使用者已完全接受並瞭解聲明中所有規範、中華民國相關法規、一切國際網路規定及使用慣例，並不得為任何不法目的使用TMUIR。

      By utilising the platform, users are deemed to have fully accepted and understood all the regulations set out in the statement, relevant laws of the Republic of China, all international internet regulations, and usage conventions. Furthermore, users must not use TMUIR for any illegal purposes.

    • 本平台盡力防止侵害著作權人之權益。若發現本平台之數位內容有侵害著作權人權益情事者，煩請權利人通知本平台維護人員([email protected])，將立即採取移除該數位著作等補救措施。

      TMUIR is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff([email protected]). We will remove the work from the repository.

    Back to Top
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋